Click Here For Main Page
37 Southey lane, Kingskerswell,
Newton Abbot, Devon. TQ12 5JG
Tel 01803 872977 E: fiobusltd@aol.com

RDO32 - RELAY DRIVER CARD


The RDO32 is a relay Driver Module capable of driving up to 32 outputs directly. Lines not required for driving relays, lamps and solenoids may be used to transmit general purpose I/O data signals at TTL levels in a similar manner to the SCO64

SPECIFICATION

APPLICATIONS

IEEE-488 Interface, Talk, Listen, Serial Poll capability.

Industrial control.

Custom scanners.

LED drivers.

FULL DATA
SHEET AVAILABLE

Address Coding 0-30 set on module DIP Switch.
Electrical Relay Driver Outputs are R1 to R32 each being Open Collector with 250mA
30V capability
Power Supply 5V + / - 10% at 250mA via Eurocard Connector.
Output Connector 96 way DIN 41612 plug using rows A, B, C.
IEEE Connector fitted on 450mm of flat cable.
Mechanical Size 160mm x 100mm x 20mm.
 

 

 SCI 40-20 DIGITAL INTERFACE SC064 - 64 WAY DIGITAL I/O
 PVR6-40 PROGRAMMABLE VOLTAGE  SC080/81 - 8 PROGRAMMABLE RELAY
  RLY 24-20 PROGRAMMABLE SWITCH   SC085/86/87 - 16 RELAY EXTENSION
 

USB 40-20 DIGITAL INTERFACE NEW

RDO32 - 32 RELAY DRIVERS

Overseas Agents
Site Design: The Net-Zone Web Design Team
1999 Fiobus Limited